Grass capable landing gear with suspension struts and 5mm thick steel pin and metal trunion
Scale four panel split flaps
Big 16x10 Propeller, 5055-390KV brushless motor and 80A ESC with EC5 connector
LED wingtip lights and dorsal signal light
17g digital hybrid servos, brass ball links, and nylon hinges on all control surfaces
Machine Screw Inserts molded into the spinner backplate to easily adjust blade tracking while mounted on the motor
Removable wings, cannon, and antenna for easy transport
Central Control Board for organized wiring
Access holes to adjust Elevator/Rudder linkages without removing the wing
Gyro ready plywood area near CG location
Two decal sets included: MA621 DV-A, Squadron Leader Tony Gaze, 129 Squadron, 1943 and BS393 GW-Z for Lt. Michel Boudier, 340 Squadron, 1942
Additional sets made available by Callie Graphics, including George Beurling, Pierre Clostermann, etc.
Technical Specifications:
Wingspan:1600mm / 62.99in
Length:1350mm / 53.1in
Flying Weight:2850g / 100.53oz
CG (Center of Gravity):90mm from the leading edge of the wing at the root
Power System:5055-390KV Brushless Outrunner Motor
Electronic Speed Control:80A Brushless with EC5 connector
Propeller / EDF:16x10 4 Blade Propeller
Servos:17g digital servo
Landing Gear Electric retracts with metal trunions
Required Battery:6S 22.2V 4000mAh to 5000mAh Li-Po with EC5 connector
Required Radio:6+ Channel 2.4GHz
Material:EPO Foam
PNP include:
PNP without ESC include:
KIT is just the foam model without any electrics
Your page text goes here